MATERIAL INSULASI TERHADAP EFEK KEHILANGAN PANAS PADA JALUR PIPA PANAS BUMI

Samsol Samsol, Kris Pudyastuti, Nicko Matthe Lie

Abstract


Heat loss which occured because heat transfer from high temperature to low temperature is one of major problem in piping design in geothermal. Insulation used to solve the problem. These analysis carried out in 18 inch pipeline in steam field. Calcium silicate, rockwool, and foam glass is selected as 3 materials in these study. These 3 materials have different thermal conductivity, so ability to withstand heat for each of them is different. This research used to determine the best material to solve heat loss. Rockwool is the best material from the other 2 


Keywords


heat loss, insulation material, insulation thickness

Full Text:

PDF

Article Metrics

Abstract views : 6| PDF views : 0

References


Cengel, Y. A. (2015). Fundamental of Thermal Fluid Sciences. Biomass Chem Eng, 49(23–6).

Corning, P. (2017). FOAMGLAS HIGH LOAD BEARING, (Fscm 08869), 1–2.

IGROS Marketing Corporation. (n.d.). Imc rockwool “.

Isnani. (2017). Optimasi Ketebalan Insulator Pada Jaringan Pipa Geothermal. Matematika, 91, 399–404.

Kreith, F. (2011). Principal of Heat Transfer Seventh Edition (Vol. 2). PROMAT. (n.d.). Calcium Silicate Insulation.




DOI: http://dx.doi.org/10.25105/petro.v8i4.6209

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 PETRO:Jurnal Ilmiah Teknik Perminyakan

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Copyright of PETRO (1907-0438 (Print) 2614-7297 (Online)). Powered by OJS

Abstracted/Indexed by:

 

 

 

Published by Universitas Trisakti:

http://trisakti.ac.id/

Prodi Teknik Perminyakan

Gedung D Lantai 4

Kampus A Universitas Trisakti

Jalan Kyai Tapa No. 1 Grogol

Jakarta Barat 11440



 Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.