ANALISIS PRESSURE BUILD-UP RESERVOIR GAS KONDENSAT DALAM FORMASI KARBONAT

Jodica Jodica, Onnie Ridaliani, Ghanima Yasmaniar

Abstract


Different flow region will form in the reservoir when the gas condensate fluid flows with a bottom hole pressure below the dew point pressure. This flow region can be identified by the pressure build-up test analysis. This analysis can be done well on reservoir with homogeneous system and becomes more complex on reservoir with heterogeneous system. The purpose of this study is to find informations and characteristics about carbonate reservoir with gas condensate. Reservoir parameters that can be obtained are initial reservoir pressure (pi), permeability (k), skin factor (s), reservoir boundary (boundary), drainage area, and average reservoir pressure ( pr ). "JD-1" exploratory well penetrated the carbonate formation with the gas condensate hydrocarbon content. The well test analysis conducted is pressure analysis with pressure build-up testing and theanalysis results show a reservoir with a two-layer model, permeability value of 154 md, skin 13.8, initial pressure 3286.3 psia, and average reservoir pressure of 3285.7 psia.

 

 


Keywords


Pressure Build-Up Test, Gas Condensate, Horner Plot

Full Text:

PDF

Article Metrics

Abstract views : 12| PDF views : 0

References


Ahmed, T. (2001). Reservoir Engineering Handbook (2nd ed.; Butterworth- Heinemann, ed.). Gulf Professional Publishing.

Ahmed, T. (2005). Advanced Reservoir Engineering.

Bourdarot, G. (1998). Well Testing: Interpretation Methods. Retrieved from www.ogs.ou.edu/Classfiles/ricktesting/Welltesting.ppt

Bourdet, D. (2003). Well Test Analysis: The Use of Advanced Interpretation Models. In Handbook of Petroleum Exploration and Production (Vol. 3). (https://doi.org/10.1016/S1567- 8032(03)80031-9)

Chai, Ooi Kiam, Kano T, Tomoeda J. Gas- condensate well test results interpretation at Helang field. 2006;564–73.

Chaudhry, A. (2004). Oil Well Testing Handbook. https://doi.org/10.1016/B978- 075067706-6/50089-8

Daltaban, T. S., & Wall, C. G. (2013).

Introduction To Well Testing. Fundamental and Applied Pressure Analysis, (March), 1–4. https://doi.org/10.1142/9781848160736_0 001.

Ginting Mulia, Djumantara Maman. 2018. Vertikal dan Horizontal Pada Reservoir CBM dengan Menggunakan Simulasi Reservoir.

Perbandingan Kinerja Produksi Sumur

Hashemi, M. Safari. Condensate blockage effects in well test analysis of dual- porosity / dual-permeability , naturally fractured gas condensate reservoirs : a simulation approach. J Pet Explor Prod Technol. 2016;6(4):729–42.

Setiati Rini. 2015. Evaluasi Pengaruh Variasi Komposisi CO2 dalam Perolehan Nilai Tekanan Tercampur Minimum. Petro, Vol 2 No 2.

Thahir Abizar Algiffari Muhammad, Madiana Atty Dwi. 2018. Analisis Keekonomian Proyek Gas-to-liquid Sebagai Alternatif Pemanfaatan




DOI: http://dx.doi.org/10.25105/petro.v8i4.6207

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 PETRO:Jurnal Ilmiah Teknik Perminyakan

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Copyright of PETRO (1907-0438 (Print) 2614-7297 (Online)). Powered by OJS

Abstracted/Indexed by:

 

 

 

Published by Universitas Trisakti:

http://trisakti.ac.id/

Prodi Teknik Perminyakan

Gedung D Lantai 4

Kampus A Universitas Trisakti

Jalan Kyai Tapa No. 1 Grogol

Jakarta Barat 11440



 Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.