Perancangan Alat Penyambung Universal pada Transporter Mini Tandan Buah Segar Kelapa Sawit

Arlimda Arkeman

Abstract


Every palm oil plantation has different characteristics. In Indonesia, some of the palm oil plantations are unique because of its peaty, muddy, and bumpy features. Today, the existing Fresh Fruit Bunch (FFB) transport equipment is rigid and unable to follow the contour of outline of plantation ground, which limits its mobility. Therefore, it is necessary to design FFB transport equipment that offers ease of mobility. The new design has a universal joint feature that connects the front of part of the equipment (driver section) with the load carrier part (rear part). The design includes three-dimensional images with its simulations, two-dimensional images and the strength analysis of the joint. Both design drawings and strength analysis are carried out using SolidWorks engineering software. The result is a design of a universal joint with a dimension of 0.2 m in length and 0.15 m in width, and is capable of rotating in two directions; each at 30 degree on Y axis and 16 degree on X axis. All components of the universal joint are SS400 steel which has a tensile strength of 250 MPa. Calculation of strength with a tensile load of 1 ton results in a safety factor of 833. This safety factor ensures the maximum life span and strength of the universal joint.

Keywords


plantation land contour; fresh fruit bunch transport equipment; universal joint; connector

Full Text:

PDF

Article Metrics

Abstract views : 23| PDF views : 0

References


Kementerian Keuangan Republik Indonesia-Badan Kebijakan Fiskal Pusat Kebijakan Ekonomi Makro, 2012, Laporan Kajian Nilai Tambah Produk Pertanian.

Intara, Y.I., Mayulu H. dan Radite P.A.S., 2013, Physical and Mechanical Properties of Palm Oil Frond and Stem Bunch for Developing Pruner and Harvester Machinery Design, International Journal of Science and Engineering, 4(2), hal. 69-74.

Nwankwojikea B. N., Odukweb A. O. dan Agunwambac J.C., 2011, “Modification of Sequence of Unit Operations in Mechanized Palm Fruit Processing,” Nigerian Journal of Technology, 30(3), hal. 41-49.

Budiyanto, Imam, P., Hidayat, A., 2007, “Analisis hubungan mutu TBS terhadap kualitas dan rendemen CPO di PT. Agromuko Bunga Tanjung,” Prosiding Seminar Nasional Sains dan Teknologi 2007, Universitas Lampung, 27-28 Agustus 2007, hal. 424-432.

Hidayati, J., Sukardi, Suryani, A., Fauz, A.M., Sugiharto, 2016, “Identifikasi Revitalisasi Perkebunan Kelapa Sawit di Sumatera Utara,” Jurnal Teknologi Industri Pertanian, 26(3), hal. 255-265 .

Winarna, Santoso, Yusuf M.A., Sumaryanto, Sutarta E.S., 2014, “Pertumbuhan Tanaman Kelapa Sawit di Lahan Pasang Surut,” Prosiding Seminar Nasional Lahan Suboptimal 2014, Palembang 26-27 September 2014, hal. 544-553.

Desrial, Yulianto, M., Rudiansyah, R.A., 2014, “Mini transporter tipe crawler,” Inovasi IPB.

Institut Pertanian STIPER Yogyakarta, 2012, “Traktor Kelapa Sawit Hidraulik SSB,” https://www.youtube.com/watch?v=QvurRPqvgQw (diunduh 21 Maret 2016).

Qingzhou longjiu Machinery, “Transporter Kelapa Sawit SWL 400,” komunikasi melalui email susanbeauty86@outlook.com (diunduh 22 Maret 2016).




DOI: http://dx.doi.org/10.25105/ms.v10i1.4134

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 MESIN

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

 

http://s11.flagcounter.com/count2/W0a/bg_FFFFFF/txt_000000/border_CCCCCC/columns_2/maxflags_10/viewers_0/labels_0/pageviews_0/flags_0/percent_0/