Analisis Sebaran Tingkat Kebisingan Di Bagian Produksi Industri Perakitan Komponen Otomotif

Amirah Puspitasari Nurhusna, Margareta M Sintorini, Melati Ferianita Fachrul

Abstract


PT XY is a company engaged in the production of compressors and automotive components that require precision in their manufacture. Noise in the work environment is a potential hazard for employee health. The purpose of this study was to analyze the noise level at PT XY using manual visualization mapping and noise distribution patterns with the 11 surfer program. This study used secondary data on noise level measurements in March and October 2018 and June and October 2019 from PT XY. with the SNI 7231-2009 method concerning the Noise Intensity Measurement Method in the Workplace which is taken for a moment for 1 hour with an interval of 6 minutes. The noise level measurement tool used is the SL-4011 Sound Level Meter. The data from the measurement of noise levels are compared with the Regulation of the Minister of Manpower of the Republic of Indonesia Number 5 of 2018 concerning Occupational Safety and Health in the Work Environment. From the analysis results obtained are described in the mapping and distribution patterns. From the overall results of the measurement of the noise level of production activities at PT XY, only 3 points exceed the quality standard. The noise level at PT XY ranges from 74 dB (A) - 88 dB (A). Noise level mapping with a visual basic of all noise level measurements, noise sources that exceed the quality standard are in the gasket ring, horn press, and sp part machining work areas. The controls that have been done are limiting noise sources and workers, rotating working hours, and making rules for the use of ear plugs

Keywords


automotive components; Noise Level; Surfer 11

Full Text:

PDF

Article Metrics

Abstract views : 0| PDF views : 0

References


Erdanto, S. M. N. 2014. Hubungan Dosis Pajanan Bisisng Harian Dengan Keluhan Gangguan Pendengaran Pada Pekerja PT NGK Busi Indonesia, Jakarta, Tahun 2014

European Agency For Safety And Health At Work (2005): Http://Dutaselarassolusindo.Com/Jenis-Jenis-Kebisingan/ (diakses: 22 Februari 2021)

Moekijat, 2002, Tata Laksana Kantor, Mandar Jaya, Bandung

National Institute Of Occupational Safety Hazards (Niosh), 2006. Occupational And Environmental Exposure Of Skin To Chemic. Diunduh Dari: Http://Www.Mines.Edu/Outreach/Oee Sc

Peraturan Menteri Tenaga Kerja Republik Indonesia Nomor 5 Tahun 2018 Tentang Keselamatan Kesehatan Kerja Lingkungan Kerja. Republik Indonesia, Jakarta. 2018.

Prasetyo, E., Caesar, D. L, dan Yusianto, W. 2017. Evaluasi Kesehatan Kerja Di Home Industri Pengolahan Roti. Prosiding HEFA (Health Events for All) 1.1

Rahmat, R. 2015 Cara Mengendalikan Kebisingan.Https://Environment-Indonesia.Com/Cara-Mengendalikan-Kebisingan/

Rahmat, R. 2015 Cara Mengendalikan Kebisingan.Https://Environment-Indonesia.Com/Cara-Mengendalikan-Kebisingan/

Sasongko, D., dkk. 2000. Kebisingan Lingkungan. Semarang: Badan Penerbit Universitas Diponegoro.

Sihar, Tigor Benjamin Tambunan. 2005. Analisis Tingkat Kebisingan Di Tempat Kerja Dan Keselamatan Kerja. Jakarta.

Sihar,Tigor Benjamin Tambunan, 2005, Kebisingan Di Tempat Kerja

Standar Nasional Indonesia SNI 16-7062-2004 Tentang Pengukurann Intensitas Penerangan di Tempat Kerja

Tachyudin, M., Solichin dan Marji. 2016. Pengaruh Tingkat Kebisingan Dan Pencahayaan Terhadap Kinerja Pada Karyawan Cv. Mitra Jaya Malang. Jurnal Teknik Mesin. Vol 24(No .1)

Tambunan, S. T. B. 2005. Kebisingan di Tempat Kerja (Occupational Noise). Yogyakarta C.V. Andi Offset

Tarwaka. 2008. Keselamatan dan Kesehatan Kerja. Surakarta: HARAPAN PRESS.

Tarwaka. 2004. Ergonomi untuk Keselamatan Kesehatan Kerja dan Produktivitas Kerja. Cetakan Pertama. Surakarta: Uniba Press.

WHO. 2004. Occupational Noise. Geneva: Protection Of The Human Environment WHO




DOI: http://dx.doi.org/10.25105/bhuwana.v1i1.9285

Refbacks

  • There are currently no refbacks.


width="60"